You are at: HOME > Discontinued Items > 9-inch SDI/HDMI Waveform On-camera LCD Monitor
9-inch SDI/HDMI Waveform On-camera LCD Monitor
# 9-inch FFS LCD Panel with LED backlight
# 1280〜800 resolution, 700:1 contrast
# 16:9 display area with 4:3 adjustment
# Underscan / Overscan, safe area
# Build-in HDMI to SDI conversion output
# Waveform (Y/Cb/Cr/R/G/B), with full scale
# Vector scope, RGB histogram
# Peaking focus assist (red/blue switch)
# Embedded audio meter (SDI 16-ch, HDMI 2-
# Real time video zoom-in and flip
# SDI timecode display
# False color, Blue only, Zebra stripes, Internal
# Front and rear 3-color TALLY light
# Customer editable video TITLE
# V-mount / Gold mount / DV mount optional
  • Product Overview
  • Technical Description
  • Specification
  • Accessories
  • Download
  • Similar Products


9-inch 1280〜800 LCD

FFS panel with LED backlight

The S-1090F adopts a 9-inch FFS (Fringe field switching) LCD panel, with 1280〜800 resolution and LED backlight, 700:1 contrast.
The LCD is overlaid with a glass, protects the screen against scratch or broken.




LCD Protective Glass

The LCD of S-1090F is overlaid with a glass, protects the screen against scratch or broken.



Multi-format Input/Output


S-1090F field monitor supports:
HD/SD-SDI input 〜 2
HD/SD-SDI loop output 〜 2
HDMI input 〜 1
HDMI loop output 〜 1
HDMI input converted to SDI output 〜 1
CVBS input 〜 1

Build-in HDMI to SDI Conversion

The build-in conversion is used to broadcast and deliver the HDMI camera video. It¨s same format conversion and supports the following HDMI formats:
480i, 576i, 720p (60 / 59.94 / 50), 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98)

Video Analysis Assistant Pattern


S-1090F supports Waveforms display under both SDI and HDMI, including Y, Cb, Cr, R, G, B channels, and full scale display of each channel. The Vector scope and R/G/B histogram can be switched on/off independently to the waveforms.

Embedded Audio Monitoring

HDSDI: 16-Ch; SDSDI/HDMI: 2-ch

The monitor displays SDI and HDMI embedded audio level meters, and supports full 16-ch meters under HDSDI input; 2-ch meters under SDSDI and HDMI input. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
The ch-1 and ch-2 embedded audio can be output via 3.5mm headphone socket and speaker.




Focus Assist

Under focus assist mode, the in-focused subject will be sketched out by red or blue lines. The focus assist is also available during the image zoom-in.

False color, Blue only, Zebra stripes, Internal colorbar

Safe Area and Scale Marker

You can select the scale of safe area frame from 80%, 85%, 90% and 95% in the menu system. And under HD input, the monitor can display a center 4:3 marker, to help composition the image when using HD recording while SD broadcasting.

Multiple Power Sources

AC adaptor / V-mount / Gold mount / Snap-on DV mount

The monitor provides a 4-pin XLR socket of DC 6.5-17V power input, and can be fixed on V-mount, Gold mount or DV battery plate.
Various types of DV battery plates are provided for optional, with snap-on designed, quick released and interchangeable with each other. There¨re following DV plates for selection:

Model of Plates Compatible batteries
S-7004FSONY NP-F970/770, SWIT S-8972, S-8970, S-8770
S-7004USONY BP-U60/U30, SWIT S-8U63
S-7004PPanasonic CGA-D54/D28, SWIT S-8D62
S-7004BPanasonic VW-VBG6, SWIT S-8BG6
S-7004JJVC BN-V428U, SWIT S-8428
S-7004VJVC BN-VF823, SWIT S-8823
S-7004iSSL-JVC50, SWIT S-8i50
S-7004CCanon BP-945/970G, SWIT S-8845, S-8945
S-7004ECanon LP-E6, SWIT S-8PE6

3-color TALLY Light

Both front and rear side, DB-9 port

There is front and rear TALLY lights with 3 colors display, and controlled via DB-9 port on the rear panel.


The monitor provides 1/4 ̄-20 screw threads on bottom, left and right side, for installing on camera handle or rigs. By S-7390 dual monitor stand, the 2 S-1090F monitors can be fixed on cranes.




Sun Hood

For outdoor using, you can apply a sun hood on the monitor. The sun hood can be easily installed via the left and right screw threads, or directly by Velcro tapes.
The sun hood is provided in the monitor package.

Package Option

S-1090F offers the simple package and luxury package for option.

Simple package includes:
1x Battery plate (V-mount or Gold mount or snap-on DV mount optional)
1x Cold shoe / Screw ball head (S-7301)
1x Sun hood (A-SH09)
1x LCD protective film (A-PF09)
1x 4-pin XLR power adaptor (A-PA02)

Luxury package includes additional:
1x Articulating arm 1/4" to 1/4" (S-7380)
1x HDMI cable with mini HDMI adaptor (S-7107)
1x D-tap to 4-pin XLR DC cable (S-7101)
1x Carrying case (A-CC09)

Input Video Formats

S-1090F support the following input video formats:
InputSupported formats
HDMI 480i/ 576i / 480p / 576p
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
SDISMPTE-274M1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP2111080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M720p (60 / 59.94 / 50)
SMPTE-125M480i (59.94)
ITU-R BT.656576i (50)

The build-in HDMI converted to SDI output supports the same format conversion, includes:
HDMI to SDI: 480i, 576i, 720p (60 / 59.94 / 50), 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98)


Available for both SDI and HDMI

The waveform is a pattern to measure and display the brightness and its distribution (in false color) of every column of the input video, separates the Y, Cb, Cr, R, G, B channels, parade display or full scale display.
The waveform graticule marks the Luma value percentages. The Luma is pure black to pure white from bottom to the top, and the 100% full lines stands for the broadcast standard highest Luma value, while the real highest Luma value (pure white) is marked as 108% dash line on
the top. The waveform pattern between 100% and 108% lines are considered as over exposed according to the broadcast standard.
The waveforms are real-time displayed, one-button switch on or off. There¨re totally 8 display modes of waveforms, and menu system can memorize the resent used mode to switch on, also you can change other modes easily in the waveform menu.

Vector Scope

Available for both SDI and HDMI

The vector scope pattern is to visualize the chrominance of input video signal by the distribution of color in the image on a circular scale. It represents saturation as distance from the center of the circle, and hue as the angle, in standard position around it. So you can see how saturated the image is and where the pixels in the image land on the color spectrum.
The vector scope pattern is divided into 6 districts, and stands for Red, Magenta, Blue, Cyan, Green and Yellow in different directions. The larger box stands for the color in 100% colorbar, and the smaller box stands for 75% colorbar.

R/G/B Histogram

Available for both SDI and HDMI

The histogram is a bar graph that shows the distribution of R / G / B values in the image. Similar as the Luma waveform pattern, the histogram is takes broadcast standard safety highest value as 100%, and 107% as the real highest value. The R / G / B distributions between 100% and 107% are considered as ineffective values in broadcast standard.




SDI Timecode Display

Under SDI input, the monitor can display the embedded SMPTE timecode (VITC1, VITC2 or LTC), which is used extensively for synchronization, and for logging and identifying material in recorded media.

Real Time 2-step Zoom-in

The first step zoom-in function is specially designed for Canon DSLR, to cut the black bar around the HDMI output video, and enlarge the center effective recorded video to full screen.
The second step zoom-in is to enlarge the video 4 times, to check the image details and help to focus.
The zoom-in function is real time operation, available when preview, recording or play back.

Peaking Focus Assist

The peaking focus assist function is to sketch out the sharpest edges of the image, for cameramen to check if the subjects are in focus. You can switch the outline color between blue and red according to different tone of the subjects. The peaking focus assist is also available during video zoom-in.




False Color

The false color is used to aid in the setting of camera exposure. Under false color mode, there¨s a color chart on the bottom of screen for reference. The over exposed subjects (above 101 IRE) on the monitor will display as RED, and the underexposed subjects will display as BLUE. For correct exposed subjects, it will display as green and pink.

Zebra Stripes

Like most professional cameras have, the zebra stripes are a warning to the over exposed areas of the image. When Luma value is over 90%, it is considered overexposed and displays the moving warning lines onto the over exposed areas.




Blue Only

Blue only is an assistant function to adjust camera color settings. Under the blue only mode, only the blue pixels are used to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment.

TALLY Connection

The front and rear TALLY lights can display red, green and yellow colors, and input controlling signals via DB-9 port. The terminal description is as follows:


Connect R with GND: Display Red
Connect G with GND: Display Green
Connect Y with GND: Display Yellow




Compact Main Board

The monitor main board is integrated designed. The chip, controlling circuit, input/output interfaces are arranged in an entire board, which ensures the stability and safety of the monitor. Meanwhile, the compact board can reduce monitor thickness, and help the cooling of the whole unit.

LCD Performance
Size9 inches
Display area194〜121mm
Aspect ratio16:9 (4:3 adjustable)
Brightness 250cd/m2
Color16.77 million colors
Viewing angleHorizontal: 140<Vertical: 120<
BNC 〜2HD/SD-SDI input
BNC 〜1Composite input
HDMI 〜1HDMI input
BNC 〜2HD/SD-SDI loop output
BNC 〜1HDMI converted to SDI output
HDMI 〜1HDMI loop output
3.5mm 〜1SDI and HDMI audio output
Video Format
SDISMPTE-274M1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP2111080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M720p (60 / 59.94 / 50)
SMPTE-125M480i (59.94)
ITU-R BT.656576i (50)
HDMI480i/ 576i / 480p / 576p
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
Working voltageDC / battery 6.5V-17V
Power consumption+18W
Working temperature0<C゛+40<C
Working humidity10%゛90%
Storage temperature-15<C゛+60<C
Storage humidity10%゛90%
Net weight (main body)1010g

Hi-Res Picture
User Manual
WorldWide Distributor Info

Find the local distributor information
Hi-Res Pictures, Brochures, Manuals
Email Newsletter
Email Newsletter Pleaseenter your Email address below and subscribe our newsletters.
Follow us at:
Contact us

Please contact SWIT at:


Fax: +86-25-85805796
Address: 10 HengTong Road, Xin¨gang, Nanjing
Economic and Technological Development Zone
Nanjing, 210038, P. R. China.




©copyright 2013.SWIT Electronics Co.,Ltd Reserved
Home|Contact us|Products|Distrbutor

leave a message

For any inquiries, questions, suggestions to SWIT and SWIT products, please leave a message to us and we will reply you soon.
Your name: