You are at: HOME > Products > Lighting > On-camera > Chip Array LED On-camera Light
S-2051
Chip Array LED On-camera Light
◆ Chip Array LED technology
◆ 40W, 3000Lux @ 1 meter, dimmerable
◆ 200W equivalent output
◆ Single shadow, glareless
◆ 60° wide beam angle, equally spread
◆ Cool touch
◆ 5000K color temperature
◆ 5600K and 3200K filter
◆ Color rendering index: 85
◆ 11-17V D-tap power supply
◆ Screw and cold shoe mount
S-2051
  • Product Overview
  • Technical Description
  • Specification
  • Accessories
  • Download
  • Related Products
Chip Array LED

New generation LED technology

The S-2051 on-camera LED light adopts the new generation LED technology called Chip Array LED, which integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, glareless light, similar to the traditional Halogen bulb light.

 

 

40W Light Output, 200W Blub Equivalent



3000 Lux @ 1 meter distance and 1 meter scale


S-2051 feeds 40W light output, and equivalent to a
200W halogen bulb. The illuminance is 3000 Lux at 1
meter distance and 1 meter scale.




Wider Beam Angle


Equally spread lights, no visible beam edge

The traditional LED lights use lens to converge and get a higher brightness, but dropped down quickly around, which will generate a visible lighting border in the image.
In comparison, the Chip Array LED generates a wider beam angle, equally spread from the center to edge, and suitable for HD shooting.



 

 

Glareless light, Single Shadow


The traditional LED array always generates several highlight
pots on retina and people will feel glaring, even can’t recover
sight until a few seconds. In comparison, the SWIT Chip Array
LED has only one bulb in appearance, and output a glareless,
single shadow light, suitable for close interview shooting.
.




3200K/5000K/5600K Color Temperature


The S-2051 LED has 5000K color temperature and also equipped with a 5600K (Daylight) and a 3200K (Tungsten) color temperature filter. You can switch the color temperature easily.


 

 

11-17V D-tap Power Supply


The S-2051 accepts 11-17V voltage input, and goes with a D-
tap to pole-tap cable (S-7104), to plug into the DC-IN port of
S-2051 and get power from D-tap power output sockets, such
as batteries, battery plates, or camera handle. 11-17V D-tap
Power Supply
.




Dimmer control


S-2051 has a dimmer controller to adjust the light output from 10%-100%. The color temperature will not change during the
dimmer controlling.





Cold Shoe and Screw head installation


S-2051 can be fixed on camera via 1/4” screw head, and the
package also goes with a spare cold shoe part for
users to change the screw connector to cold shoe.

Standard Package

S-2051 package includes:
1x D-tap to Pole-tap power cable (S-7104)
1x Spare cold-shoe connector
1x Portable bag


About the Chip Array LED


LED has taken place of Halogen bulb at broadcast on-camera light several years ago, for its high efficient output, low power consumption and long life. However, due to the obvious disadvantage of glaring, multiple shadows and shining, people are still thinking of the Halogen bulb that can feed soft light.
Now SWIT has brought out the new LED technology into on-camera lighting, called Chip Array LED light, which integrates the LEDs into a chip, with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, glareless light that similar to the traditional Halogen bulb light.

1

The Beam Angle Comparison


The traditional LED lights use lens to converge and get a higher brightness, as s result, the effective lighting scale is limited. Normally we say if the illuminance drops to a half, it is considered ineffective lighting scale. So according to the illuminance-scale chart, in 1 meter lighting distance, the traditional lens converged LED light has only 600mm diameter scale, about 33° beam angle, while SWIT chip array LED light covered 1000mm diameter scale, about 55° beam angle. Moreover, the lens converged light has higher brightness in the center, but dropped down quickly around, which will generate a visible lighting border in the image and that is unbearable for cameras.

2
Input voltageDC 11V-17V
Power consumption40W
Halogen equivalent200W
Beam angleH60°/ V60°
Color temperature5000K and 5600K/3200K switchable
Color rendering index85
Illuminance3000Lx @ 1m distance and 1m diameter scale
Power connectorD-tap cable
Weight400g
Dimension103×157×84mm

 

Hi-Res Picture
Download
User Manual
Download
WorldWide Distributor Info

Find the local distributor information
Download
Hi-Res Pictures, Brochures, Manuals
Email Newsletter
Email Newsletter Pleaseenter your Email address below and subscribe our newsletters.
 
Follow us at:
Contact us

Please contact SWIT at:

 

Telephone:+86-25-85805753
Fax: +86-25-85805796
Email: contact@swit.cc
Address: 10 HengTong Road, Xin’gang, Nanjing
Economic and Technological Development Zone
Nanjing, 210038, P. R. China.

 

 

 


©copyright 2013.SWIT Electronics Co.,Ltd Reserved
Home|Contact us|Products|Distrbutor

leave a message

For any inquiries, questions, suggestions to SWIT and SWIT products, please leave a message to us and we will reply you soon.
Your name: 
E-mail:    
Country:  
Message: