S-7005S Gold mount to V-mount battery Adaptor
› Gold mount camera to use V-mount battery
› New V-mount release button
› D-tap DC output socket
› Smaller in size
› Stable and reliable connectivity
Adapt V-mount battery to Gold mount camera
S-7005S is used to adapt V-mount batteries to Panasonic AntonBauer gold mount cameras.
The front side is V-mount plate, to attach SONY V-mount batteries, and the rear side is AntonBauer gold mount connection for the Panasonic gold mount cameras.
D-tap Output Socket
The S-7005S adaptor is equipped with a D-tap DC output socket on the side, for simultaneous DC power output to additional on-camera equipments.
Nominate voltage is 14.4V
Durable Release Button
S-7005S is equipped with a new battery release button, with outstanding feeling and resilience, and ensures the stable and reliable connectivity of battery,
Nominate Voltage | 14.4V |
Applicable battery | V-mount batteries |
Applicable camera | Gold mount cameras |
Dimensions | 119×99×35mm |
weight | 150g |
MSRP
$8222
MSRP
$8222
MSRP
$8222
We provide a 1-year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or malfunction caused by use, maintenance, or installation not in accordance with the User Manual's instructions, including improper battery insertion or removal, incorrect polarity connection, exposure to moisture or conductive debris, or disassembly/repair without authorization of SWIT.
(2) Any damage caused by using third-party batteries, power sources, or accessories that do not comply with the recommended electrical specifications (e.g., voltage, current, or contact pin configuration), including but not limited to electrode overheating, melting, arcing, or short circuits resulting from incompatible battery design or poor battery quality.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning, flood, etc.) or human factors including dropping the plate, impact damage, forced battery removal at incorrect angles, or insertion of damaged or deformed batteries.
(4) Any damage or malfunction not caused by the product's design, workmanship, or manufacturing quality — including normal wear and tear of spring-loaded electrodes, contact pins, locking mechanisms, or surface finish scratching.
(5) Electrode breakage, bending, or deformation resulting from violent use, excessive force during battery attachment or detachment, or improper alignment of the battery onto the plate is specifically excluded from warranty coverage. This includes snapped, crushed, or pushed-in contact pins caused by user mishandling.
(6) Electrical or thermal damage (including melted plastic around electrodes, burnt contacts, or discoloration from heat) that is determined to be caused by a third-party battery's internal short circuit, over-current draw, overheating, or defective connector design shall not be covered under this warranty. Such conditions are the responsibility of the battery manufacturer.
