DB-F570 NP-F type USB-C Dummy Battery
› USB-C PD Power Input
› NP-F type Pins 8.4V (Reg.) 3A output
› For SONY ENG cameras with NP-F plate
› For BMPCC 6KG2 / 6KPRO
› For ZCAM E2/E2-M4/S6/S6G/F6/F8
› For any Video Devices with NP-F plate
› Display power info in SONY viewfinder
› Cable length 50cm
NP-F Type USB-C Dummy Battery
DB-F570 is the NP-F type dummy battery with USB-C port,
allows you to power SONY ENG cameras, and all 3rd party
cameras and video devices that use NP-F battery, by external
USB-C power source.
Power Cameras by USB-C Source
You can use USB-C power bank, USB-C V-mount batteries or
USB-C power adaptor to provide continuous power for
cameras and video devices, extend runtime and ensure
continuous power without interruption.
Power Info Read by Cameras
The DB-F570 dummy battery features a digital power
management chip that enables data exchange with
SONY ENG camcorders, displaying remaining battery
level information in the Viewfinder.
USB-C input | 9V/12V/15V/20V 2.25A |
Battery pins output | 8.4V (Reg.), 3A |
Compatible cameras | SONY HXR-NX100/200, HXR5R/NX3 SONY HXR-MC2500 SONY HDR-FX1000/1000E, AX2000 BMD BMPCC 6KPRO / 6KG2 ZCAM E2/E2-M4, E2-S6/S6G, E2-F6/F8 and all video devices with NP-F plate |
Cable length | 50cm |
MSRP
MSRP
MSRP
-
DB-DF570
Dual Side NP-F Dummy Battery with USB-C
D-tap or USB-C input, to dual side NP-F output and USB-C output.
-
DB-E6P
Canon LP-E6P USB-C Dummy Battery
USB-C input to LP-E6P dummy, for Canon EOS DLSR and mirroless cameras
-
DB-FZ100
SONY NP-FZ100 USB-C Dummy Battery
USB-C input to NP-FZ100 dummy, for SONY FX3, FX2, A7 series
-
DB-DF570R
270° Rotate Dual Sided NP-F Dummy Battery with USB-C
D-tap input, Dual sided NP-F and USB-C PD output. Update of 270° Rotatable.
We provide a 1-year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or malfunction caused by use, maintenance, or installation not in accordance with the User Manual's instructions, including improper insertion into camera or power device, incorrect polarity connection, cable bending beyond recommended radius, or disassembly/repair without authorization of SWIT.
(2) Any damage caused by using third-party power supplies, batteries, chargers, or accessories that do not comply with the recommended electrical specifications, or by operating the product beyond its rated current, voltage, or load limits as stated in the technical specifications — including but not limited to melted insulation, burnt contacts, internal short circuits, or blown fuses resulting from over-current, over-voltage, or excessive load.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning, flood, etc.) or human factors including crushing, pulling with excessive force, pinching, dropping, or improper storage in contact with sharp or heavy objects.
(4) Any damage or malfunction not caused by the product's design, workmanship, or manufacturing quality — including normal wear and tear of cable jackets, connector plating, strain relief boots, or contact spring tension.
(5) Physical damage to plugs, sockets, connector housings, locking tabs, or terminal pins resulting from violent use, improper insertion/removal, forced connection with incompatible ports, or pulling on the cable body instead of the connector is specifically excluded from warranty coverage. This includes bent, snapped, or cracked plug shells, broken latch mechanisms, separated solder joints from excessive strain, and deformed pin contacts.
(6) Electrical damage (including melted connectors, scorched dummy battery casings, deformed DC jacks, or cable insulation shrinkage) that is determined to be caused by connection to a power source or device exceeding the product's specified voltage, current rating, or duty cycle shall not be covered under this warranty.
